Compatible With All Dexso Tonneau Covers
Dexso Tonneau Cover Replacement Velcro Kit
Replacement hook-and-loop strips that hold the vinyl top snug against the frame rail. Worn velcro is a common reason a cover starts to sag or shift slightly along the rail after a few years of use.
Shop This KitOverview
Underneath the main closure straps, Dexso covers use hook-and-loop strips along the frame rail to keep the vinyl top snug and prevent it from shifting side to side. Like any hook-and-loop material, it gradually loses grip strength after repeated opening, closing, and sun exposure. This kit gives you fresh strips sized to match the rail length on your specific cover.
Replacing worn velcro is a small, inexpensive fix for a top that’s started to sag slightly or shift out of position, without needing to touch the straps, seals, or the vinyl top itself.
What’s Included
Frame-Side Strips
Adhesive-backed hook strips sized to match the frame rail length on Dexso covers.
Vinyl-Side Strips
Matching loop strips sized to attach to the underside of the vinyl top.
Adhesive Backing
Both strip sets use a weatherproof adhesive backing for a clean, no-tools installation.
Install Guide
A printed installation guide walks through removing the old velcro and applying the new strips evenly.
Checking Compatibility
This kit is sized for the standard frame rail length used across the Dexso roll-up and quad-fold cover lineup. Rail length varies slightly by truck bed size, so check the model name on your original packaging or email us your truck and cover style and we’ll confirm the right kit before you order.
How Installation Works
- Remove the old velcro. Peel the worn strips off both the frame rail and the underside of the vinyl top.
- Clean both surfaces. Wipe down the frame rail and vinyl underside so the new adhesive bonds properly.
- Apply the frame-side strip. Press the new hook strip evenly along the frame rail.
- Apply the vinyl-side strip. Press the matching loop strip onto the underside of the vinyl top.
- Test the seat. Close the cover and check that the top sits snug and even along the full rail length.
Specifications
Why Replace Your Velcro
- Restores a snug, even fit without replacing the whole cover
- Adhesive-backed strips install in under 25 minutes, no tools needed
- Sized to match the frame rail across the full Dexso lineup
- Far less expensive than a full cover replacement
Frequently Asked Questions
How do I know if my velcro needs replacing?
If the vinyl top sags slightly, shifts side to side, or doesn’t sit as snug along the rail as it used to, worn hook-and-loop strips are usually the cause.
Will this fit my specific cover model?
Rail length varies slightly by truck bed size. Email us your cover model or truck and bed length if you want to confirm the right kit before ordering.
Do I need any tools to install it?
No. Both strip sets use an adhesive backing that presses directly onto the frame rail and vinyl underside — no drilling or special tools required.
How long does the new velcro last?
The hook-and-loop material typically holds up for several years of regular use before it needs replacing again.