Compatible With All Dexso Tonneau Covers
Dexso Tonneau Cover Replacement Strap Kit
Replacement tie-down straps for the side closure system, sized to match the hardware used on every Dexso soft cover. A worn or stretched strap is the most common reason a cover starts to sit loose or flap at highway speed.
Shop This KitOverview
Both the roll-up and quad-fold Dexso covers rely on a strap-based closure system to hold the vinyl top down along the side rails. Straps stretch and wear with regular use, especially in climates with heavy sun exposure or frequent temperature swings. This kit gives you a full set of fresh straps sized to match the closure hardware used across the Dexso lineup.
Replacing worn straps restores the same tight, secure closure your cover had on day one, without needing to replace the vinyl top or frame — the parts that are usually still fine even after the straps have stretched out.
What’s Included
Full Strap Set
A complete set of replacement side closure straps sized to match your specific cover model.
Buckle Hardware
Replacement buckles included where the original hardware attaches to the strap.
Mounting Anchors
Anchor points sized to bolt or clip into the existing frame mounting locations.
Install Guide
A printed installation guide walks through removing the old straps and setting the new ones evenly.
Checking Compatibility
This kit is sized for the standard strap spacing used across the Dexso roll-up and quad-fold cover lineup. Strap count and spacing vary slightly by truck bed length, so check the model name on your original packaging or email us your truck and cover style and we’ll confirm the right kit before you order.
How Installation Works
- Release the old straps. Unclip or unbolt each worn strap from the frame.
- Remove the buckles. Detach the old buckle hardware if it’s being replaced along with the straps.
- Attach the new straps. Secure each new strap at the original anchor points.
- Install the buckles. Fit the new buckle hardware per the included guide.
- Test the closure. Close and secure the cover a few times to confirm even tension across all straps.
Specifications
Why Replace Your Straps
- Restores a tight, secure closure without replacing the whole cover
- Sized to match the strap spacing across the full Dexso lineup
- Fixes the most common cause of a cover sitting loose or flapping
- Far less expensive than a full cover replacement
Frequently Asked Questions
How do I know if my straps need replacing?
If the cover sits loose, flaps at highway speed, or you notice visible fraying or stretching in the webbing, it’s a good sign the straps have worn down.
Will this fit my specific cover model?
Strap count and spacing vary slightly by truck bed length. Email us your cover model or truck and bed length if you want to confirm the right kit before ordering.
Do I need any special tools to install it?
No, just a basic screwdriver or drill driver — the straps attach to the existing frame mounting points.
Can I replace just one strap instead of the whole set?
The kit is sold as a full set, but if only one strap is damaged, you can install just that one and keep the rest as spares for later.
Get a Tight Closure Again
A fresh strap kit restores a secure fit in under 40 minutes.
Shop This Kit